Automatic Load Transfer Switch Atys

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p Mprovides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in the ATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p M provides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in the ATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p Mprovides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in the ATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p M provides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in the ATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS t M and ATyS g Mare three-phase (4P) automatic transfer switches with positive break indication. The ATyS g M is also available in 2P for single phase applications.The ATyS t M and ATyS g M both include ATyS d M functionality together, with an integrated controller for automatic transfer dedicated to mains/mains applications (ATyS t M) and mains/genset applications (ATyS g M). They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFast commissioningATyS t M and g Mtransfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.ATyS g M: specifically designed for mains/genset applicationsTheATyS g Mintegrated controller has been designed to provide specific functions for these applications (genset startup, tests on load...) together with the monitoring of the voltage and frequency of both sources for three-phase and single-phase networks.ATyS t M: specifically designed for mains/mains applicationsTheATyS t Mintegrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.Secured configuration settingsIn order to prevent any risk of unintended change to the configured settings, a sealable cover is available as an accessory.

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p Mprovides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in theATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS p Mare single-phase or three-phase automatic transfer switches with positive break indication.Functions include ATyS t M and ATyS g M capability, with additional programmable parameters and a triggering function. A product model with communication is available. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFlexible programmingATyS p Mtime delays and inputs/outputs are completely configurable, hence enabling the easy monitoring of specific applications (load shedding, test…) and the definition of an operating cycle specifically adapted to your application.Trip functionATyS p Mprovides a function for transferring the load to the 0 position in case of loss of both power supply sources (tripping). In this way the load is protected from issues due to source instability.Communication and configurationA specific version ofATyS p Mis available with integrated Modbus communication. This gives acces to most product data (status, voltages, frequencies…). A user friendly configuration software is also available free (Easyconfig) to configure, view and save all the parameters in the ATyS p M.Remote control interfaceSpecifically designed for installations where the product is enclosed, the remote interface displays product status on the front panel (D10) or displays and controls with access to programming (D20).

ATyS t M and ATyS g Mare three-phase (4P) automatic transfer switches with positive break indication. The ATyS g M is also available in 2P for single phase applications.The ATyS t M and ATyS g M both include ATyS d M functionality together, with an integrated controller for automatic transfer dedicated to mains/mains applications (ATyS t M) and mains/genset applications (ATyS g M). They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFast commissioningATyS t M and g Mtransfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.ATyS g M: specifically designed for mains/genset applicationsTheATyS g Mintegrated controller has been designed to provide specific functions for these applications (genset startup, tests on load...) together with the monitoring of the voltage and frequency of both sources for three-phase and single-phase networks.ATyS t M: specifically designed for mains/mains applicationsTheATyS t Mintegrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.Secured configuration settingsIn order to prevent any risk of unintended change to the configured settings, a sealable cover is available as an accessory.

ATyS t M and ATyS g Mare three-phase (4P) automatic transfer switches with positive break indication. The ATyS g M is also available in 2P for single phase applications.The ATyS t M and ATyS g M both include ATyS d M functionality together, with an integrated controller for automatic transfer dedicated to mains/mains applications (ATyS t M) and mains/genset applications (ATyS g M). They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFast commissioningATyS t M and g Mtransfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.ATyS g M: specifically designed for mains/genset applicationsTheATyS g Mintegrated controller has been designed to provide specific functions for these applications (genset startup, tests on load...) together with the monitoring of the voltage and frequency of both sources for three-phase and single-phase networks.ATyS t M: specifically designed for mains/mains applicationsTheATyS t Mintegrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.Secured configuration settingsIn order to prevent any risk of unintended change to the configured settings, a sealable cover is available as an accessory.

ATyS t M and ATyS g Mare three-phase (4P) automatic transfer switches with positive break indication. The ATyS g M is also available in 2P for single phase applications.The ATyS t M and ATyS g M both include ATyS d M functionality together, with an integrated controller for automatic transfer dedicated to mains/mains applications (ATyS t M) and mains/genset applications (ATyS g M). They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.AdvantagesFast commissioningATyS t M and g Mtransfer switches offer significant time saving during commissioning (the process takes 2 to 3 minutes). Thanks to the design that allows commissioning through just one potentiometer (4 on the ATyS g M) and four DIP switches, a screwdriver is all that is required to configure the parameters.ATyS g M: specifically designed for mains/genset applicationsTheATyS g Mintegrated controller has been designed to provide specific functions for these applications (genset startup, tests on load...) together with the monitoring of the voltage and frequency of both sources for three-phase and single-phase networks.ATyS t M: specifically designed for mains/mains applicationsTheATyS t Mintegrated controller has been designed to provide all the functions necessary for these applications (operation with or without priority, preferred source selection) together with the monitoring of the voltage and frequency of both sources for three-phase networks.Secured configuration settingsIn order to prevent any risk of unintended change to the configured settings, a sealable cover is available as an accessory.